Publish Time: 2023-01-20 Origin: Site
Split heat pump is a device that transfers thermal energy from a low temperature heat source to a high temperature heat source. The low-temperature heat sources usually used in heat pump installations are the media around us - air, river water, sea water, municipal sewage, surface water, groundwater, reclaimed water, fire pools, or the discharge of auxiliary fluids from industrial production equipment, these working fluids Often has a similar temperature to the surrounding medium.
How does the split heat pump work?
What are the advantages of using split heat pump?
What are the main components of split heat pump?
Split heat pump is mainly composed of compressor, heat exchanger, axial flow fan, heat preservation water tank, water pump, liquid storage tank, filter, throttling device and electronic automatic controller. After the power is turned on, the axial flow fan starts to run, the outdoor air passes through the evaporator for heat exchange, and the air with reduced temperature is discharged from the system by the fan. A kind of low-pressure working medium gas is compressed into high-temperature and high-pressure gas and sent to the condenser. The water forcedly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use. The working medium is cooled into a liquid, and the liquid is expanded. After the valve is throttled and cooled down, it flows into the evaporator again. This cycle works repeatedly. The heat energy in the air is continuously heat pumped to the water, so that the water temperature in the heat preservation water tank gradually rises, and finally reaches about 55 ℃, which is just suitable for people to take a bath. This is Split The basic working principle of heat pump.
Because the compressor of split heat pump works under a basic constant pressure and temperature, the working conditions of the compressor are also stable. In just 5~10 minutes, through a constant temperature of the refrigerant entering and leaving, the compressor will reach a stable operating load and can then run for a long time. In addition, the low-temperature tap water directly absorbs the heat of the high-temperature refrigerant, the refrigerant can be fully cooled, the high-pressure pressure of the system is reduced, and the compressor consumes less power to overcome the system pressure, thereby prolonging the life of the compressor and reducing the frequency and frequency of high-pressure protection. The hidden danger of compressor cylinder explosion accident. Therefore, in terms of working principle and working conditions, split heat pump can well protect the compressor and improve the defrosting efficiency.
Split heat pump is composed of compressor, condenser, evaporator, axial flow fan, liquid storage tank, filter, shut-off device and electronic automatic controller. Among them, the compressor, condenser, evaporator, and throttling device are called the four major components.
For more information about split heat pump, please contact Guangzhou Realm Energy Saving Equipment Co. Ltd. has committed to providing the increasing of split heat pump, and making them more effective, reliable, and consistent.
a